letter
B
), Sideband Cable Connection.
Figure 70. Installing the IFT Carrier
5.
Install the Intel® Omni-Path Fabric Processor Cable
a)
Line up the cable CPU connector end and install it vertically onto the Fabric CPU connector. Push
the connector forward toward the substrate until fully engaged. (See letter
A
)
b)
Rotate and snap the cable wire latch into the lock position onto the bolster plate latch posts.
c)
Insert the two IFP plugs into the IFT carrier slots on the board. When installing the two plugs, the
latch release buttons are marked P1 and P2 will face down in the system. As illustrated, ensure that
the connector marked P1 on the cable is inserted into the P1 connector and the P2 plug is inserted
into the P2 connector (See letter B). Ensure that the cables are pushed fully forward and are fully
engaged.
d)
At the rear of the system, plug in the fabric cable. See the Intel® Omni-Path Cables Matrix for a list
http://www.intel.com/content/www/us/en/high-performance-computing-
