Figure 51. Installing Riser 1
2.7.3
Remove Riser 2
1.
Power off the compute module and disconnect the power cable(s).
2.
3.
Loosen the 3 screws (See
A
)
4.
Pull and lift the riser straight up and out of the system (See
B
and
C
)
Figure 52. Removing Riser 2
2.7.4
Install Riser 2
1.
Power off the compute module and disconnect the power cable(s).
2.
3.
Align and insert Riser 2 into Riser Slot 2 (See
A)
4.
Ensure that the Riser is all the way down and fully seated (See
B
)