Intel EtherExpress PRO/100+ Page 3 Installation Manual Download

Page: 3 / 38

iii

Contents

Introduction.............................................................................................. 1
Connect the Network Cable .................................................................... 2
Configure the Controller and Install Drivers.......................................... 3

Windows 95...................................................................................... 3
Windows NT Server or Workstation............................................... 5
DOS and Windows 3.1 Setup for Novell NetWare Clients............ 8
NetWare Server, Client 32, UNIX, OS/2, Banyan, and Other
Operating Systems ......................................................................... 10

Installing Multiple Adapters ................................................................. 11
Select Duplex Mode (Optional)............................................................ 12
Choose Ethernet Controller Teaming Options..................................... 15

Setting Up Adapter Fault Tolerance Only..................................... 15
Setting Up Adaptive Load Balancing............................................ 18
Setting -Up Fast EtherChannel ...................................................... 21

Troubleshooting and FAQs................................................................... 24

If the OnBoard Ethernet Controller Can’t Connect to the Network..
24
Testing the Controller (Diagnostics) ............................................. 25
Frequently Asked Questions (FAQs) ............................................ 26

Technical Information........................................................................... 28

PCI Installation Tips....................................................................... 28
“Push” Installation for Windows 95.............................................. 29
Fast Ethernet Wiring ...................................................................... 29
Fast Ethernet Hubs and Switches .................................................. 29

Network Software License Agreement ................................................ 31

ENet2.book Page iii Monday, May 4, 1998 9:53 AM

Summary of Contents for EtherExpress PRO/100+







































Search results

Summary of Contents for EtherExpress PRO/100+

Reviews:

Related manuals for EtherExpress PRO/100+

Brands by name

Popular brands

Intel EtherExpress PRO/100+, Installation Manual

Search results

Summary of Contents for EtherExpress PRO/100+

Reviews:

Related manuals for EtherExpress PRO/100+

Brands by name

Popular brands