Intel ESM-APLC, User Manual

Page: 50 / 84

ESM-APLC
User’s Manual
50 ESM-APLC User
’s Manual
Communication with slow devices may
require more than 1 stop bit.
Flow Control
None
Hardware
RTS/CTS [Default]
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a
‘stop’ signal can
be sent to stop the data flow. Once the
buffers are empty, a
‘start’ signal can be sent
to re-start the flow. Hardware flow control
uses two wires to send start/stop signals.
VT-UTF8 Combo Key Support
Disabled
Enabled [Default]
Enable VT-UTF8 Combination Key Support
for ANSI/VT100 terminals.
Recorder Mode
Disabled [Default]
Enabled
With this mode enabled only text will be sent.
This is to capture Terminal data.
Resolution 100x31
Disabled [Default]
Enabled
Enables or disables extended terminal
resolution.
Legacy OS Redirection
Resolution
80x24 [Default]
80x25
On Legacy OS, the Number of Rows and
Columns supported redirection.
Putty KeyPad
VT100 [Default]
Intel Linux
XTERMR6
SCO
ESCN
VT400
Select FunctionKey and KeyPad on Putty.
Redirection After BIOS POST
Always Enable [Default]
BootLoader
When Bootloader is selected, then Legacy
Console Redirection is disabled before
booting to legacy OS. When Always Enable
is selected, then Legacy Console Redirection
is enabled for legacy OS. Default setting for
this option is set to Always Enable.
3.6.2.7.2 Legacy Console Redirection Settings