Intel ESM-APLC, User Manual

Page: 51 / 84

ESM-APLC User
’s Manual
ESM-APLC User
’s Manual
51
Item Option Description
Legacy Serial redirection Port COM0 [Default] ,
Select a COM port to display redirection of
Legacy OS and Legacy OPROM Messages.
3.6.2.7.3 Console Redirection Settings
Item Option Description
Terminal Type
VT100
VT100+
VT-UTF8 [Default] ,
ANSI
VT-UTF8 is the preferred terminal type for
out-of-band management. The next best
choice is VT100+ and then VT100+ and
them VT100. See above, in Console
Redirection Settings page, for more Help
with Terminal Type/Emulation.
Bits per second
9600
19200
57600
115200 [Default]
Select serial port transmission speed. The
speed must be matched on the other side.
Long or noisy lines may require lower
speeds.
Flow Control
None [Default]
Hardware RTS/CTS
Software Xon/Xoff
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a
‘stop’ signal can
be sent to stop the data flow. Once the
buffers are empty, a
‘start’ signal can be sent
to re-start the flow. Hardware flow control
uses two wires to send start/stop signals.