28 | INSTALLATION INSTRUCTIONS
Installing Additional Tablets
Use the following steps if you already have an Intel Web Tablet
installed in your home and you are adding a new tablet.
Note:
If you purchased an Intel Web Tablet that includes a
wireless adapter, do NOT install the new adapter on the PC. The
tablet will use your existing wireless adapter to communicate
with the PC.
Begin Charging the Tablet
1
Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2
Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power
jack.
3
Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire
installation process takes approximately 45 minutes.
Get Your Network Code From the PC
1
At the PC, open the Windows Control Panel, then double-
click the
Wireless Control Panel
icon. The Wireless Control
Panel dialog displays.
2
Write down the network code in the space provided below.
You will need this network code to set up the tablet.
3
Close the Wireless Control Panel dialog.
Return to the Tablet and Complete the Installation
1
Return to the tablet and leave it connected to AC power
while you set it up.
2
Touch
Continue
and follow the instructions on the tablet
screen.
3
When prompted for a network code, use the AnyPoint
network code that you found on the PC and wrote down in
the previous section.
The tablet will reset when its setup process completes.
Important!
We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first
time.You can use the tablet while it is charging.
Register Your New Tablet
After the tablet resets, it is ready for use. The first time you
press a home button, you’ll be asked to register your new tablet.
Accessing Your Home Page From the New Tablet
The home buttons on the new tablet will match the home
buttons on your existing tablet(s). Use the same home button on
each tablet to access your personal home page. For example, if
your home button is the green one, use the green button on any
of your tablets to access your home page.
Only one tablet can use a particular home button at any given
time. If you press a home button and someone is already using
that button on another tablet, you’ll receive a message notifying
you that another tablet is using that button.
Write your network code here:
Summary of Contents for EJM-HRMP131
Page 1: ...EXHIBIT T User Manual FCC ID EJM HRMP131...
Page 25: ...18 GETTING HELP...
