Intel ECB-862 Series Page 64 User Manual Download

Page: 64 / 114

ECB-862/862L

ECB-862/862L User’s Manual

4.5.4.8 System BIOS Cacheable

Allows the system BIOS to be cached for faster system performance.

The choice: Enable, Disable.

4.5.4.9 Video BIOS Cacheable

Allows the video BIOS to be cached for faster video performance.

The choice: Enable, Disable.

4.5.4.10 Video RAM Cacheable

Allows the video RAM to be cached for faster video performance.

The choice: Enable, Disable.

4.5.4.11 Memory Hole At 15M-16M

Enabling this feature reserves 15MB to 16MB memory address space to ISA expansion
cards that specifically require this setting. This makes the memory from 15MB and up
unavailable to the system. Expansion cards can only access memory up to 16MB.

The choice: Enable, Disable.

4.5.4.12 Delayed

Transaction

This function is used to meet the latency of PCI cycles to from ISA bus. Try to enable or
disable it, if you have ISA card compatibility problem.

The choice: Enable, Disable.

4.5.4.13 Delay Prior to Thermal

When you system temperature higher, you can set the DRAM access time slowdown
between on 4 min – 32 min delay.

The choice: 4 Min, 8 Min, 16 Min, and 32 Min.

4.5.4.14 AGP Aperture Size (MB)

Choose 32, 64MB. Memory-mapped, graphics data structures can reside in the Graphics

Aperture.

The choice: 4 , 8, 16, 32, 64, 128 and 256.

Summary of Contents for ECB-862 Series



















































































































Search results

Summary of Contents for ECB-862 Series

Reviews:

Related manuals for ECB-862 Series

Brands by name

Popular brands

Intel ECB-862 Series, User Manual

Search results

Summary of Contents for ECB-862 Series

Reviews:

Related manuals for ECB-862 Series

Brands by name

Popular brands