Intel ECB-862 Series Page 58 User Manual Download

Page: 58 / 114

ECB-862/862L

ECB-862/862L User’s Manual

4.5.3 Advanced CMOS Setup Defaults

This Setup includes all of the advanced features in the system. The detail descriptions are
specified as below.

Figure 3: The Advanced CMOS Features

4.5.3.1 Virus

Warning

Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection.
If this function is enabled and someone attempt to write data into this area, BIOS will show
a warning message on screen and alarm beep.

Enabled

Activates automatically when the system boots up causing a warning

message to appear when anything attempts to access the boot

sector or hard disk partition table.

Disabled

No warning message will appear when anything attempts to access

the boot sector or hard disk partition table.

Summary of Contents for ECB-862 Series



















































































































Search results

Summary of Contents for ECB-862 Series

Reviews:

Related manuals for ECB-862 Series

Brands by name

Popular brands

Intel ECB-862 Series, User Manual

Search results

Summary of Contents for ECB-862 Series

Reviews:

Related manuals for ECB-862 Series

Brands by name

Popular brands