Programming the SPI Flash Firmware
6.
Click the Edit button. The View Contents in the Memory Chip window pop-
up is shown in the figure below.
Figure 33. DediProg Edit Screen – with SPI Flash Contents Displayed
7.
Click Read. The DediProg software reads the contents of the SPI flash
memory and displays them in the window.
8.
Click Chip Buffer to File.
9.
Enter a file name when prompted. The chip image is saved to the file.
§
Intel
®
Gateway Solutions for the IoT – Development Kit – DK50
October 2014
Getting Started Guide
Document Number: 330496-005
45
