Intel DK50 Series User Manual Download Page 27

Page: 27 / 72

Installing Intelligent Device Platform Tools on the Host System

Wind River Software Installation Prerequisites

5.3

Before starting the host tools installation, check the following:

5.3.1

Disk Space and Installation Folders

About 42 gigabytes of disk space is needed during the host tools installation. About 12

GB of that will be permanently used after the installation is complete.

The installation process creates three folders in the home directory of your Host

System:

•

WindRiver

The folder to install the host tools. The installation requires

approximately 12 GB of free space in this folder.

•

Installer

- A temporary folder that can be deleted later. The installation

requires approximately 15 GB of free space in this folder.

•

tmp

– A temporary folder used by the installation process. The installation

requires approximately 15 GB of free disk space.

5.3.2

Wind River Host Tools License

You must have a temporary License Authentication Code or a permanent License

Authentication File to install the Intelligent Device Platform host tools.

•

For Early Access kits, instructions to obtain a temporary License

Authentication Code are included in the Dear Customer Letter that

accompanied the kit.

•

If you purchased a kit, instructions to obtain a permanent License

Authentication File are provided at the time of purchase.

5.3.3

Internet Connection

The time required to install the host tools is primarily dependent on the download

speed of the Host System’s internet connection. The installer downloads

approximately 15 gigabytes of data from Wind River’s servers. This may take several

hours.

Intel

Gateway Solutions for the IoT – Development Kit – DK50

October 2014

Getting Started Guide

Document Number: 330496-005

Summary of Contents for DK50 Series









































































Search results

Summary of Contents for DK50 Series

Reviews:

Brands by name

Popular brands

Intel DK50 Series, User Manual

Search results

Summary of Contents for DK50 Series

Reviews:

Brands by name

Popular brands