Intel DB85FL Specification Download Page 16

Page: 16 / 84

Intel Desktop Board DB85FL Technical Product Specification

1.2

Online Support

To find information about…

Visit this World Wide Web site:

Intel Desktop Board DB85FL

http://www.intel.com/products/motherboard/index.htm

Desktop Board Support

http://www.intel.com/p/en_US/support?iid=hdr+support

Available configurations for Intel
Desktop Board DB85FL

http://ark.intel.com

Supported processors

http://processormatch.intel.com

Chipset information

https://www-
ssl.intel.com/content/www/us/en/chipsets/performance-
chipsets/chipsets.html

BIOS and driver updates

http://downloadcenter.intel.com

Tested memory

http://www.intel.com/support/motherboards/desktop/sb/CS-
025414.htm

Integration information

http://www.intel.com/support/go/buildit

1.3

Processor

The board supports 4

generation Intel Core processors. Other processors may be

supported in the future. This board supports processors with a maximum wattage of

95 W Thermal Design Power (TDP). The processors listed above are only supported

when falling within the wattage requirements of Intel Desktop Board DB85FL. See the

Intel web site listed below for the most up-to-date list of supported processors.

For information about…

Refer to:

Supported processors

http://processormatch.intel.com

CAUTION

Use only the processors listed on the web site above. Use of unsupported processors

can damage the board, the processor, and the power supply.

NOTE

This board has specific requirements for providing power to the processor. Refer to

Section 2.5.1 on page 54 for information on power supply requirements for this board.

Summary of Contents for DB85FL





















































































Search results

Summary of Contents for DB85FL

Reviews:

Related manuals for DB85FL

Brands by name

Popular brands

Intel DB85FL, Specification

Search results

Summary of Contents for DB85FL

Reviews:

Related manuals for DB85FL

Brands by name

Popular brands