Intel BX80569Q9550 - Core 2 Quad 2.83 GHz Processor Page 154 Datasheet Download

Page: 154 / 172

System Management Bus Interface

154

Intel

Itanium

Processor 9300 Series and 9500 Series Datasheet

6.4.4.5

Maximum Memory Transfer Rate

Offset 39h-3Bh provides maximum memory transfer rate on the Intel

Scalable

Memory Interconnect (Intel

SMI). Systems may need to read this offset to decide if

processors and Intel

75xx Scalable Memory Buffers support the same Intel

SMI

transfer rate. Six 4-bit BCD digits are used to provide the maximum transfer rate in
MT/s.

Example

: A speed of 4.8 GT/s is shown as 004800h.

6.4.4.6

Minimum Memory Transfer Rate

Offset 3Ch-3Eh provides minimum “operating” memory transfer rate on the Intel

Scalable Memory Interconnect. Six 4-bit BCD digits are used to provide the minimum
transfer rate in MT/s.

6.4.4.7

Uncore Voltage

Offset 3Fh-40h is the nominal processor Uncore voltage for this part, rounded to the
next thousandthin mV and reflected in BCD.

Example

: 1200 mV is stored as 3Fh: 00h, 40h: 12h.

6.4.4.8

Uncore Voltage Tolerance

Offset 41h and 42h contain the Uncore voltage tolerances, high and low respectively.
These use a decimal to Hexadecimal conversion. Example: 20 mV tolerance would be
saved as 14h.

6.4.5

Cache Data

This section contains cache related data.

6.4.5.1

L3 Cache Size

Offset 46h-47h is the L3 cache size field. The field reflects the size of the level three
cache in MBytes in bcd format.

Example:

The Intel

Itanium

Processor 9300 Series has a 24 MB L3 cache. Thus,

offsets 46h & 47h will contain 24 & 00 respectively.

6.4.5.2

Cache Voltage

Offset 48h-49h is the nominal processor cache voltage for the Intel

Itanium

Processor 9300 Series processor, rounded to the next thousandth, in mV and is
reflected in bcd.

These fields are RESERVED for the Intel

Itanium

Processor 9500 Series.

6.4.5.3

Cache Voltage Tolerance

Offset 4Ah and 4Bh contain the cache voltage tolerances, high and low respectively.
These use a decimal to Hexadecimal conversion.

Example:

20 mV tolerance would be saved as 14h.

These fields are RESERVED for the Intel

Itanium

Processor 9500 Series.

Summary of Contents for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor













































































































































































Search results

Summary of Contents for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Reviews:

Related manuals for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Brands by name

Popular brands

Intel BX80569Q9550 - Core 2 Quad 2.83 GHz Processor, Datasheet

Search results

Summary of Contents for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Reviews:

Related manuals for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Brands by name

Popular brands