Intel
®
Core™ 2 Duo Processor and Intel
®
Core™ Duo Processor with Intel
®
E7520 Chipset Development Kit
January 2007
User’s Manual
Order Number: 316068-001US
19
Intel
®
Core™ 2 Duo Processor and Intel
®
Core™ Duo Processor with Intel
®
E7520 Chipset
Development Kit
6. Plug the fan connector to the fan pin header J7J1 on the board.
Note:
The heatsink removal process is the reverse of the installation procedure.
2.5.8
MCH Heatsink Installation
This section may not apply if the MCH heatsink is pre-installed on the board. However,
you may want to briefly look over the procedure to verify that the heatsink is properly
installed and it has not been damaged in the packaging.
Note:
If the Thermal Interface Material (TIM) is scratched, scrape it off and replace with new
material. Use a TIM with high thermal conductivity, such as thermal grease or phase
change material.
1. Clean the top surface of the MCH die with a clean towel and isopropyl alcohol (IPA).
Figure 8.
Screw Tightening Order
Figure 9.
MCH Heatsink Top View
