Intel BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX Product Manual Download | Manualshive

Page: 3 / 86

background image

iii

Preface

This Product Guide gives information about board layout, component installation, BIOS
update, and regulatory requirements for Intel

®

Desktop Board DP45SG.

Intended Audience

The Product Guide is intended for technically qualified personnel. It is not intended for
general audiences.

Use Only for Intended Applications

All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.)
for use in personal computers (PC) for installation in homes, offices, schools, computer
rooms, and similar locations. The suitability of this product for other PC or embedded
non-PC applications or other environments, such as medical, industrial, alarm systems,
test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization

The chapters in this Product Guide are arranged as follows:
1 Desktop Board Features: a summary of product features
2 Installing and Replacing Desktop Board Components: instructions on how to install

the Desktop Board and other hardware components

3 Updating the BIOS: instructions on how to update the BIOS
4 Configuring for RAID Using Intel

®

Matrix Storage Technology: information about

configuring your system for RAID

5 Configuring

for

Intel

®

Rapid Recover Technology (Intel

®

RRT): information about

configuring your system for Intel Rapid Recover Technology

A Error Messages and Indicators: information about BIOS error messages and beep

codes

B Regulatory Compliance: describes the board’s adherence to safety standards and

EMC regulations and its product certifications

«
1
2
3
4
5
...
»

Summary of Contents for BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX























































































Reviews:

No comments

Related manuals for BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX

Vb-C60 - Ptz Network Camera

Brand: Canon Pages: 30

Brand: IEI Technology Pages: 19

Brand: IEI Technology Pages: 87

Brand: IEI Technology Pages: 3

Brand: Octavo Pages: 28

Brand: Obihai Pages: 2

Brand: Quatech Pages: 27

Brand: VMIC Pages: 126

Brand: SMART Pages: 15

Brand: Alesis Pages: 61

Brand: Grundig Pages: 24

Brand: Patton electronics Pages: 145

Brand: Juniper Pages: 420

Brand: EZCast Pro Pages: 4

Brand: ekwb Pages: 2

Brand: ATI Technologies Pages: 87

cPCIS-1100 Series

Brand: ADLINK Technology Pages: 48

Brand: Idis Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands