manualshive.com logo in svg

Intel BLKD945GCPE - LGA775 1066FSB 2DDR2 2GB Audio Video Lan mATX 10Pack Motherboard, Technical Product Specification, Page: 60 / 80

Share
Download
Intel BLKD945GCPE - LGA775 1066FSB 2DDR2 2GB Audio Video Lan mATX 10Pack Motherboard Technical Product Specification Download Page 60

Intel Desktop Board D945GCPE Technical Product Specification 

60 

 

3.7.3

 

Booting Without Attached Devices 

For use in embedded applications, the BIOS has been designed so that after passing 
the POST, the operating system loader is invoked even if the following devices are not 
present: 

•

 

Video adapter 

•

 

Keyboard 

•

 

Mouse 

3.7.4

 

Changing the Default Boot Device During POST 

Pressing the <F10> key during POST causes a boot device menu to be displayed.  This 
menu displays the list of available boot devices (as set in the BIOS setup program’s 
Boot Device Priority Submenu).  Table 28 lists the boot device menu options. 

Table 28. Boot Device Menu Options 

Boot Device Menu Function Keys 

Description

 

<

↑

> or <

↓

> 

Selects a default boot device 

<Enter> 

Exits the menu, saves changes, and boots from the selected device 

<Esc> 

Exits the menu without saving changes 

Summary of Contents for BLKD945GCPE - LGA775 1066FSB 2DDR2 2GB Audio Video Lan mATX 10Pack Motherboard

















































































Reviews:

No comments