manualshive.com logo in svg

Intel AXXSW1GB, User Manual

Share
Download
Intel AXXSW1GB User Manual Download Page 61

 

48

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 

Defining VLAN Properties

The 

VLAN Properties Page

 provides information and global parameters for configuring 

and working with VLANs. 

To define VLAN properties:

1. Click 

Layer 2 > VLAN > Properties

. The 

VLAN Properties Page

 

opens.

Figure 33. VLAN Properties Page

The 

VLAN Properties Page

 contains the following fields:

•

Delete 

— Deletes VLANs. The possible field values are:

—

Checked 

— Deletes the selected VLAN.

—

Unchecked

 — Maintains VLANs.

•

VLAN ID 

— Displays the VLAN ID.

•

VLAN Name 

— Displays the user-defined VLAN name.

•

Type 

— Displays the VLAN type. The possible field values are:

—

Dynamic 

— Indicates the VLAN was dynamically created through GARP.

—

Static 

— Indicates the VLAN is user-defined.

—

Default 

— Indicates the VLAN is the default VLAN.

Summary of Contents for AXXSW1GB





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands