manualshive.com logo in svg

Intel AXXSW1GB, User Manual

Share
Download
Intel AXXSW1GB User Manual Download Page 19

 

6

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 

Using Screen and Table Options

This option contains screens and tables for configuring devices. This section contains the 

following topics: 

•

Adding Configuration Information

•

Modifying Configuration Information

•

Deleting Configuration Information

Adding Configuration Information

User-defined information can be added to specific Web Interface pages, by opening a new 

Add page. 

To add information to tables or Web Interface pages: 

1. Open an Embedded Web Interface page. 
2. Click 

. An add page opens, such as the 

Add MAC Based ACL

:

Figure 4. Add MAC Based ACL

3. Define the relevant fields.
4. Click 

. The configuration information is saved, and the device is 

updated.

Summary of Contents for AXXSW1GB





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands