manualshive.com logo in svg

Intel AXXSW1GB, User Manual

Share
Download
Intel AXXSW1GB User Manual Download Page 158

 

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide

145

Receive Statistics

•

Total Bytes (Octets) 

— Displays the number of octets received on the selected 

interface.

•

Unicast Packets 

— Displays the number of Unicast packets received on the selected 

interface.

•

Multicast Packets 

— Displays the number of Multicast packets received on the 

selected interface.

•

Broadcast Packets 

— Displays the number of Broadcast packets received on the 

selected interface.

Transmit Statistics

•

Total Bytes (Octets) 

— Displays the number of octets transmitted from the selected 

interface.

•

Unicast Packets 

— Displays the number of Unicast packets transmitted from the 

selected interface.

•

Multicast Packets 

— Displays the number of Multicast packets transmitted from the 

selected interface.

•

Broadcast Packets 

— Displays the number of Broadcast packets transmitted from 

the selected interface.

2. Select an interface in the 

Interface

 field. The interface statistics are displayed.

Resetting Interface Statistics Counters

To reset the Interface statistics counters:

1. Open the 

Interface Statistics Page

. 

2. Click 

. The interface statistics counters are cleared.

Summary of Contents for AXXSW1GB





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands