Intel AXXSW1GB, User Manual

Page: 102 / 220

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 89
Defining Spanning Tree Interface Settings
Network administrators can assign STP settings to specific interfaces using the Spanning
Tree Interface Settings Page . The Global LAGs section displays the STP information for
Link Aggregated Groups.
To assign STP settings to an interface:
1. Click Layer 2 > Spanning Tree > Interface Settings. The Spanning Tree Interface
Settings Page opens:
Figure 66. Spanning Tree Interface Settings Page
The Spanning Tree Interface Settings Page contains the following fields:
•
Ports — Displays the port on which STP is enabled
.
•
LAGs — Displays the LAG on which STP is enabled.
If Ports are selected, the following fields are displayed:
•
Port — Displays the port for which the information is displayed.
•
LAG — Displays the LAG for which the information is displayed
•
STP — Indicates if STP is enabled on the port. The possible field values are:
— Enabled — Indicates that STP is enabled on the port.
— Disabled — Indicates that STP is disabled on the port.
•
Port Fast — Indicates if Fast Link is enabled on the port. If Fast Link mode is enabled
for a port, the Port State is automatically placed in the Forwarding state when the port