Intel AXXRMS2AF040, Hardware User'S Manual

Page: 13 / 50

Intel® Integrated RAID Module RMS2AF040 and RMS2AF080 Hardware User’s Guide 3
Protocol Support
Each port on the SAS controllers supports SAS devices, SATA II devices, or both using
SSP, SMP, STP, and SATA II as follows:
•
Serial SCSI Protocol (SSP) to enable communication with other SAS devices.
•
SATA II Protocol to enable communication with other SATA II devices.
•
Serial Management Protocol (SMP) to share topology management information
with expanders.
•
Serial Tunneling Protocol (STP) support for SATA II through expander interfaces..
Operating System Support
•
Windows Server 2008* R2, Windows 7*, Windows Server 2003*, Windows Vista*
•
Red Hat* Enterprise Linux 5.0
•
SuSE* Linux Enterprise Server 10 and 11
•
VMWare* ESX 4.0
•
Solaris* 10
The operating systems supported may not be supported by your server board. See the
Tested operating system list for your server board at
http://www.intel.com/support/go/motherboards/server/index.htm .
To make sure the RAID module supports your operating system, see also the Tested
Hardware and Operating System List for the Intel
®
Integrated RAID Module
RMS2AF040 and RMS2AF080.
Usability
•
Small, thin cabling with up to 6.0 Gb/s serial, point-to-point data transfer rates.
•
Support for non-disk devices and mixed capacity drives.
•
Support for intelligent XOR RAID levels 0, 1, 5, 10, and 50.
•
Dedicated or global hot spare with auto rebuild if an array drive fails.
•
User-defined strip size per drive: 8, 16, 32, or 64 KB.
•
Advanced array configuration and management utilities provide:
— Online Capacity Expansion (OCE) adds space to existing drive or new drive.
See Appendix A: Drive Roaming and Drive Migration Install for limitations on
OCE and RAID migration.
— Online RAID level migration (upgrade of RAID mode may require OCE)
— Drive migration
— Drive roaming