Embedded Intel® Atom™ Processor N2800 with Intel® NM10 Express Chipset Development Kit User‘s Manual
73
3.5
Mechanical Considerations
3.5.1
Form Factor
The N2800 embedded board is installed into the Development Kit‘s Mini-ITX form-
factor chassis. Figure 21 illustrates the mechanical form factor of the inside of the
chassis. Dimensions are given in inches [millimeters]. The outer dimensions are 6.7
inches by 6.7 inches [170.18 millimeters by 170.18 millimeters]. Location of the I/O
connectors and mounting holes are in compliance with the ATX specification.
NOTE
The embedded board is designed to have a total height of less than 20 mm from the
underside of the board to the top of its tallest components, including all back panel I/O
ports, internal connectors, installed system memory, and factory-installed thermal
solutions, in compliance with thin mini-ITX requirements per version 2 of the
Mini-ITX
Addendum to the microATX Motherboard Interface Specification
.
For more information about
Refer to
Thin mini-ITX form factor
http://www.formfactors.org/developer%5Cspecs%5CMini_ITX_
Spec_V2_0.pdf
