Embedded Intel® Atom™ Processor N2800 with Intel® NM10 Express Chipset Development Kit User‘s Manual
112
early in the installation sequence. Additional information about this issue can be found
on the Microsoft website.
http://support.microsoft.com/kb/314859
http://support.microsoft.com/kb/916196
Note: Not all USB floppy disk drives are created equal. If you go this route, please
read the above support documents from Microsoft to get a list of supported floppy
drives.
7.4.2
F6 install with floppy
1.
Download either the STOR_10.1.0.1008_f6flpy-x86.zip or
STOR_10.1.0.1008_f6flpy-x64.zip SATA Driver files from
2.
Put the SATA drivers on a floppy disk.
a)
iaahci.cat
b)
iaAHCI.inf
c)
iastor.cat
d)
iaStor.inf
e)
iaStor.sys
f)
license.txt
g)
TXTSETUP.OEM
h)
F6Readme.txt
3.
Attach the USB Floppy drive to the CRB.
4.
Connect a SATA or USB CD or DVD drive with the Microsoft Windows XP with
Service Pack 3 image.
5.
Boot the CRB to initiate the Windows XP Setup process.
6.
When the Windows XP Setup screen appears, you will soon see a message in
the grey bar at the bottom of the screen. This message will say, ―Press F6 if
you need to install a third party SCSI or RAID driver….‖
a)
Press F6.
b)
The installer will continue on for a minute or so before the F6 install
screen will appear.
