manualshive.com logo in svg

Intel Application Accelerator RAID Edition, User Manual

Share
Download
Intel Application Accelerator RAID Edition User Manual Download Page 21

 

 

 

Serial ATA (SATA) 

R

   

User's Manual

 

21 

7 

Serial ATA (SATA) 

7.1 Description 

Serial ATA (SATA) is a new storage interface designed to replace parallel ATA (e.g. IDE 
technology). SATA was designed for a variety of reasons including performance headroom, 
cabling issues, and voltage tolerance requirements. SATA combines software transparency, low 
cost, scalability, and design flexibility. SATA has attracted widespread industry support through 
the Serial ATA Working Group (

www.serialata.org

). 

Note: 

Please refer to Appendix A for additional information on Serial ATA hard drives. 

7.2 

Installing Serial ATA Hard Drives 

Note: 

Please refer to Appendix A for additional information on Serial ATA hard drives. 

Installing Serial ATA (SATA) hard drives requires the use of a SATA data cable (7-pin, 4-
conductor) which supports the Serial ATA protocol and a SATA power cable. Either end of the 
SATA data cable can be connected to the SATA hard drive or the connector on the motherboard. 

Summary of Contents for Application Accelerator RAID Edition






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands