Intel AnyPoint User Manual Download Page 113

Page: 113 / 133

Chapter 5 – Diagnostics and Troubleshooting

2002 Intel Corporation

108

If all else fails

If none of the previous problems and solutions seem to
match your situation, try the following:

•

Unplug the power cord from the gateway, wait at
least 5 seconds, then plug the power cord back in.

•

Reset the gateway.

•

If you cannot get to the system tools screen to
perform this reset then unplug the power cord from
the gateway, wait at least 5 seconds, then plug the
power cord back in.

•

Restore the gateway to its original factory defaults.

Reconfigure the gateway using the gateway configuration
software.

Reading the gateway indicator lights

As an initial operational check of your gateway, check the
indicator lights. The indicators are described in Chapter 1
of the User’s Guide.

Reading settings and device status

If you are having connection problems with your
broadband modem, or the wired or wireless network,

Summary of Contents for AnyPoint






























































































































Search results

Summary of Contents for AnyPoint

Reviews:

Related manuals for AnyPoint

Brands by name

Popular brands

Intel AnyPoint, User Manual

Search results

Summary of Contents for AnyPoint

Reviews:

Related manuals for AnyPoint

Brands by name

Popular brands