Intel AnyPoint User Manual Download Page 12

Page: 12 / 133

Chapter 1 – Introduction

2002 Intel Corporation

Back panel

connectors

The Intel Gateway’s back panel includes the cable
connectors and Reset button.

Wireless Off - There are no wireless devices

communicating with the gateway.

Green solid - at least one wireless device is
connected to the gateway.

Green blinking - traffic is being passed
between at least one wireless device and the
gateway.

Ethernet
1-4

Off - no PC is connected to any of the four
Ethernet ports.

Green solid - A valid link has been established
at 10Mbps.

Green blinking - traffic is being passed at
10Mbps.

Yellow solid - A valid link has been established
at 100Mbps.

Yellow blinking - traffic is being passed at
100Mbps.

Power

Accepts the cylinder end of the power cable.
Plug the other end of the power cable into a
standard electrical outlet. (It is recommended
that you use a surge protector.) See the Power
light on the front panel in the previous section.

Ethernet Accept RJ-45 Ethernet-style connectors for

connecting up to four PCs to the gateway’s 4-
port switch.

Power

Ethernet

Internet

Reset

12V/1.2A

Summary of Contents for AnyPoint






























































































































Search results

Summary of Contents for AnyPoint

Reviews:

Related manuals for AnyPoint

Brands by name

Popular brands

Intel AnyPoint, User Manual

Search results

Summary of Contents for AnyPoint

Reviews:

Related manuals for AnyPoint

Brands by name

Popular brands