- 14 -
Advanced Functions
T :
CTCSS / DCS TRANSMITTER SETUP
In stand-by status, press the FUN Key (8) to enter the menu mode. The
SQL
indication and the Menu item
1
(L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the
T
indication
(R) and the Menu item
12
(L) appear on the LCD display. Press the FUN key (8) to enter the T setup.
Press the MONITOR Key (13) to switch between the
CTCSS
tone selection and
DCS
tone selection.
In the DCS tone selection, the LCD display will show the indication
TD
and the DCS tone number. Press
the UP/DOWN keys (7) keys to select the desired CTCSS / DCS Tone number or select
OFF
to disable the
function. Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the
FUN Key (8) to confirm and return to the Menu selection. In transmitting mode, if the CTCSS / DCS
functions are enabled, the CTCSS Icon (C) or DCS Icon (D) will appear on the LCD display (5).
C :
CTCSS / DCS SETUP (RECEIVING AND TRANSMITTING MODES)
In stand-by status, press the FUN Key (8) to enter the menu mode. The
SQL
indication and the Menu item
1
(L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the
C
indication
(R) and the Menu item
13
(L) appear on the LCD display. Press the FUN key (8) to enter the C setup.
Press the MONITOR Key (13) to switch between the
CTCSS
tone selection and
DCS
tone selection. In the
DCS tone selection, the LCD display will show the indication
RD
and the DCS tone number. Press the
UP/DOWN keys (7) keys to select the desired CTCSS / DCS Tone number or select
OFF
to disable the
function. Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the
FUN Key (8) to confirm and return to the Menu selection. If the CTCSS / DCS functions are enabled, the
CTCSS Icon (C) or DCS Icon (D) will appear on the LCD display (5).
SAV : Power Save Setup
This function reduces the battery consumption when no signal is received or when no operation is
performed (it means when no key is pressed, no switch is turned on/off). The user may enable or disable
this function.
In stand-by status, press the FUN Key (8) to enter the menu mode. The
SQL
indication and the Menu item
1
(L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the
SAV
indication (R) and the Menu item
14
(L) appear on the LCD display. Press the FUN key (8) to enter the
SAV setup. Press the UP/DOWN keys (7) to select
ON
(Power Save enabled) or
OFF
(Power Save
disabled). Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the
FUN Key (8) to confirm and return to the Menu selection.
SCAN : Automatic Scanning Setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The
SQL
indication and the Menu item
1
(L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the
SCAN
indication (R) and the Menu item
15
(L) appear on the LCD display. Press the FUN key (8) to enter the
SCN setup. Press the UP/DOWN keys (7) to select
CO
(Carrier Scan) or
TO
(Time Scan). Press the
CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8) to confirm
and return to the Menu selection.
To start the Automatic Channel SCAN, press the FUN key (8) and the MONITOR key (13).
CO
(Carrier Scan) : If this option is selected, SCAN will automatically stop when a signal is detected on
one channel, in order to listen to the communication and SCAN will re-start when no more signal is
detected on that channel for a few seconds.
TO
(Time Scan) : If this option is selected, SCAN will automatically stop when a signal is detected on one
channel, and re-start automatically after a few seconds.
English
Summary of Contents for HT-446S
Page 39: ...Notes ...
Page 40: ......
