Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
VOX : VOX Level Setup
Your radio is equipped with a user selectable Voice Operated Transmitter function (VOX), that is used
for automatic voice transmission. In this mode, transmission is automatically initiated by speaking into
the microphone (9) and there is no need to push the PTT key (11).
In stand-by status, press the FUN Key (8) to enter the menu mode. The
SQL
indication and the Menu item
1
(L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the
VOX
indication (R) and the Menu item
7
(L) appear on the LCD display. Press the FUN key (8) to enter the VOX
setup. Press the UP/DOWN keys (7) keys to select the desired VOX sensitivity level (from
01
to
09
). The
VOX level
09
indicates the highest VOX sensitivity.
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
If the VOX function is enabled, the VOX icon (N) appears on the LCD display (5).
To disable the VOX function, repeat the above procedure and select OFF in the VOX sensitivity level
selection.
NAM : Channel Name ON/OFF
The Channel Naming function allows to assign an alphanumeric name to each channel. The channel
name can be edited only if the Channel Naming function (
NAME ?
) is enabled with optional
programming kit and it can have up to 6 digits. Please refer to CHANNEL NAMING SETUP at page 15.
The user may enable or disable the NAM function, by proceeding as follow :
in stand-by status, press the FUN Key (8) to enter the menu mode. The
SQL
indication and the Menu item
1
(L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the
NAM
indication (R) and the Menu item
8
(L) appear on the LCD display. Press the FUN key (8) to enter the
NAM setup. Press the UP/DOWN keys (7) keys to select
ON
(function enabled) or
OFF
(function disabled).
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
If the NAM function is enabled, the channel name will appear on the LCD display. Otherwise on the LCD
will appear the indication
CH-
and the selected channel number.
AUTOMATIC CHANNEL SCANNING
To start the Automatic Channel SCAN, press the FUN key (8) and the MONITOR key (13). SCAN will
automatically stop when a signal is detected on one channel, in order to listen to the communication and
SCAN will re-start when no more signal is detected on that channel for a few seconds.
During the scanning process, press the UP/DOWN keys (7) to choose the SCAN direction.
To stop the SCAN function press the PTT (11) or FUN (8) keys.
Menu Operation - Automatic Channel Scanning
- 12 -
English
Summary of Contents for HT-446S
Page 39: ...Notes ...
Page 40: ......