Intek HT-446S, Instruction Manual

Page: 11 / 40

- 9 -
Getting Acquainted with the Product
English
D. DCS Icon
The DCS Icon (D) is lighted when the DCS function is enabled. Please refer to TONE SQUELCH
function at page 13-14.
E. SCR Icon (only model HT-446S/SCR)
The SCR Icon (E) is lighted when the Scrambler function is enabled. This function is available
only in model HT-446S/SCR and it may be enabled with the optional PC programming kit.
Before enabling this function, please make sure that local regulations allow the use of this
device.
F. + - Icons
Not available on this model.
G. R Icon
Not available on this model.
H. S Icon
The S Icon (H) is lighted when the Power Save function is enabled. Please refer to POWER SAVE
SETUP at page 14.
I. Battery Level Indicator
It shows the current battery level condition.
L. Numerical Indication
It shows the selected Channel Number and the function number in the Menu Mode.
M. Narrow Band Icon
This icon shows the 12.5KHz channel spacing and it cannot be modified by user.
N. VOX Icon
The VOX icon is lighted when the VOX function has been enabled. Please refer to VOX LEVEL
SETUP at page 12.
O. Channel Scanning Icon
This Icon is lighed when the selected channel is programmed to the scanning list. Please refer to
CHANNEL SCANNING ADDITION/DELETION at page 11.
P. Frequency Reading (25-5-75).
The frequency reading is available only in Memory Mode. Please refer to MODE function at page 13.
Q. RF Digital Meter
It indicates the transmitter RF output power.
R. Dot Matrix Indication
It provides full information on channel and all enabled functions.
S. H Icon
Not available on this model.
T. L Icon
It shows the 0.5W RF output power and it cannot be modified by user.
U. Signal Digital Bar Meter
Indicates the received signal strenght in the receive mode.