D.
SUBWOOFER
20
76. CONNECT SUBWOOFER
Connect the Neutrik plug to the subwoofer. Slide the subwoofer
into the compartment. Do not attach the mounting screws yet.
77. FASTEN SUBWOOFER
Once you’ve completed settings and confirmed everything is oper-
ating correctly, fasten the subwoofer. The CAD image at left has
some transparancy so you can see how the bolts attach (1). Use
the two
#10-24 x 2.5” Socket Head Cap Bolts
and
Black Flat Washers.
Make sure the enclosure is fully seated into the compartment.
Press the bolts through the carpet and into the hole until they
make contact with the bracket. Start the threads by hand!
You only need to snug the bolts down, DO NOT OVERTIGHTEN!
78. SUBWOOFER LOGO BADGE
Affix the
Rectangular Domed Logo Badge
to the subwoofer grille (3)
as shown.
79. SETTINGS
In the vehicle audio settings, center fade and balance, zero out all
bass/treble and equalization, and turn off Logic 7.
80. SET BASS & TREBLE TO FLAT
From the music control section in the headunit, select TONE ->
BASS. Set the bass level to flat (centered dial). Repeat for TREBLE.
These are cricial!
Center the BALANCE and FADER
Select TONE -> VOLUME SETTINGS -> GONG. Set the gong vol-
ume to the lowest level. You can adjust this back up to preference
later.
SETTINGS
