C.
SOUNDST
AGAE
15
51. REMOVE THE DRIVERS SIDE DOOR TRIM (STEP 3)
Remove the door handle trim cover (1). Look for the small open-
ing indicated by the arrow and start there. Work your way
around the edge and remove the trim.
52. REMOVE THE DRIVERS SIDE DOOR TRIM (STEP 4)
Remove the two Torx T-25 screws shown at the arrows. You will
likely need a nut driver or socket extension to reach them.
53. REMOVE THE DRIVERS SIDE DOOR TRIM (STEP 5)
Remove the Door Trim Panel. Start where the arrow is pointing.
Insert your plastic panel removal tool between the door trim and
the door sheet metal. Pry up until the clips release and you can
get your fingers behind the panel. Pull firmly. Work your way
around the bottom of the door first., then up to the top. Be care-
ful of the door lock indicator - lift the trim panel up and over the
lock indicator.
54. REMOVE THE DRIVERS SIDE DOOR TRIM (STEP 6)
You do not need to remove the door panel trim completely, but
you can if you want. You can leave it attached and prop up the
bottom, or you can disconnect the door handle release and the
remaining wiring and remove the panel completely.
55. REMOVE THE FACTORY MIDRANGE DRIVER
Remove the three Torx T-20 screws indicated. Unplug and remove
the midrange driver.
Retain the Torx T-20 screws, you will use them to mount the new
midrange.
