11
31. PLACE GEAR RACK INTO TRUNK CENTER COMPARTMENT
Place the gear rack into the trunk center compartment
32. REMOVE AMPLIFIER COVER
Remove the (4) hex screws and lift the cover off the amplifier.
33. PLACE DSP AND AMPLIFIER ON GEAR RACK
Place the DSP and the Amplifier on the gear rack. Do not fasten
them yet
34. DSP CONNECTIONS
Connect the 4-pin DSP power connector (1) and 24-pin DSP input/
output connector (2).
35. AMPLIFIER CONNECTIONS
(1) Connect the power wiring and remote turn-on wires (carefully
note + and - for power - red = positive).
(2) Connect the input RCAs according to the labels (1 & 2 wires to
input 1 & 2, etc).
(3) Connect the output connectors according to labels.
B.
AMPLIFIER & SIGNAL WIRING
