Integra KEY-2.7, Instruction Manual

Page: 12 / 20

12
Manual Programming
—Continued
Integra MODE = SET + S2
Push SET followed
by the S2 Key to enter
Integra mode. The
System LED flashes
teal.
At the MZA-4.7 turn ON and OFF the zone
twice. The keypad detects the amplifier and
programs itself to address the zone and
device. Integra mode automatically exits.
RESET = SET + S6 + S6
To reset the keypad,
push SET followed
by two S6 pushes.
The System LED
will go from RED to
GREEN at the completion of the memory
wipe.
IR RECIEVER TOGGLE = SET +
Standby
The IR receiver is
normally disabled. To
enable the receiver
press SET followed
by the Standby Key,
the System LED will flash Green/white. Push-
ing Standby a second time toggles the IR
receiver OFF, system LED will flash RED/
white. Exit by pushing the SET key.
-VOL VOL+
-VOL VOL+
-VOL VOL+