Integra KEY-2.7, Instruction Manual

Page: 8 / 20

8
Installation
The KEY-2.7 chassis mounts directly to the wall
surface. The following steps outline the installation
procedure:
• Cut out the required mounting hole in the wall
above the flush-box.
• Terminate a RJ45 plug to the CAT5E cable
-
see
wiring instructions on page 9.
• Connect the RJ45 plug to the KEY-2.7.
• Secure the keypad in position using the supplied
flush-box screws.
• Program the keypad (see page 11).
• Select the required Source Key Cap’s, and
secure in position using the Key Cap Bracket.
• Push the keypad cover plate into position.