Integra DTR-40.4, Instruction Manual

Page: 76 / 104

Controlling Other Components
En-76
Controlling Other
Components
You can use the AV receiver’s remote controller to control
your other AV components. This section explains how to
enter the remote control code for a component that you
want to control: DVD, TV, CD, etc.
The following Remote Mode buttons are preprogrammed
with remote control codes for controlling the components
listed. You do not need to enter a remote control code to
control these components.
For details on controlling these components, see the
indicated pages.
You can look up for an appropriate remote control code
from the on-screen menu.
Preprogrammed Remote Control
Codes
BD/DVD Integra/Onkyo Blu-ray Disc player
(
➔
page 79 )
TV/CD Integra/Onkyo CD player (
➔
page 78 )
STB/DVR Apple TV
Looking up for Remote Control Codes
You need to connect your TV to the HDMI output
(
HDMI OUT MAIN ) to make the following on-screen
setting.
1
Press
Receiver
followed by
Home
.
2
Use
e
/
r
to select “Setup”, and then press
Enter
.
3
Use q / w to select “Remote Controller Setup”, and
then press Enter .
4
Use q / w to select “Remote Mode Setup”, and then
press Enter .
5
Use
q
/
w
to select a remote mode, and then press
Enter .
The menu of category selection appears.
6
Use
q
/
w
to select a category, and then press Enter .
The keyboard screen for brand name input appears.
7
Use q / w / e / r to select a character, and then press
Enter .
Repeat this step for the first three characters of the
brand name.
When you have entered the 3rd character, select
“
Search ” and press Enter .
A list of brand names is retrieved.
If the desired brand name is not found:
Use r to select “Not Listed”, and then press Enter .
The keyboard screen for brand name input appears.
8
Use
q
/
w
to select a brand, and then press
Enter
.
A remote control code with its instructions are
displayed. Follow the procedure.
9
If you can control the component, use
q
/
w
to select
“OK”, and then press
Enter
.
The on-screen menu returns to the “ Remote Mode
Setup ” front screen.
If you cannot control the component, use q / w to
select “Try Next Code” and press Enter .
The next code is displayed.