58
En
■
TV Control
`
Off
:
TV Control disabled.
`
On
:
TV Control enabled.
Set to “
On
” when you want to control the AV receiver
from an
p
-compatible TV that is connected to
HDMI.
Note
• Do not assign the component connected with the HDMI input to
the
TV/CD
selector when you set “
TV Control
” setting to “
On
”.
Otherwise, appropriate CEC (Consumer Electronics Control)
operation is not guaranteed.
• Set to
“
Off
” when the TV is not compatible or when it is unclear
whether the TV is compatible or not.
• The
“
TV Control
” setting can be set only when the “
HDMI
Control
”
(
➔
57
)
and
“
Power Control
” settings are both set to
“
On
”.
• Refer to the connected component’s instruction manual for
details.
Network
These settings are for use with home automation equip-
ment and external controllers.
With this preference, you can protect your settings by
locking the setup menus.
Main menu
Lock Setup
■
Setup
`
Locked
:
Setup menus locked.
`
Unlocked
:
Setup menus not locked.
When the setup menus are locked, you cannot change any
setting.
You can change various audio settings from the Home
menu.(
➔
24
).
Note
These settings are disabled when:
• a pair of headphones is connected, or
• the “
Audio TV Out
” setting is set to “
On
” (
➔
56
) and an input
selector other than
HDMI
is selected.
Tone Control Settings
You can adjust the bass and treble for the front speakers,
except when the Direct or THX listening mode is selected.
■
Bass
`
–10dB
to
0dB
to
+10dB
in 2 dB steps.
You can boost or cut low-frequency sounds output
by the front speakers.
■
Treble
`
–10dB
to
0dB
to
+10dB
in 2 dB steps.
You can boost or cut high-frequency sounds output
by the front speakers.
Note
• To bypass the bass and treble tone circuits, select the Direct or
THX listening mode.
• Alternatively, you can use the AV receiver
’s
Tone
and
+/–
(
➔
60
).
Speaker Levels
You can adjust the volume of each speaker while listening
to an input source.
These temporary adjustments are cancelled when the AV
receiver is set to Standby. To save the setting you made
here, go to “
Level Calibration
” (
➔
47
) before setting the
AV receiver to Standby.
■
Subwoofer Level
`
–15dB
to
0dB
to
+12dB
in 1 dB steps.
■
Center Level
`
–12dB
to
0dB
to
+12dB
in 1 dB steps.
Note
• You cannot use this function while the AV receiver is muted.
• Speakers that are set to “
No
” or “
None
” in the “
Speaker Con-
figuration
” (
➔
46
) cannot be adjusted.
Audyssey Settings
■
Dynamic EQ
■
Dynamic Volume
See “Dynamic EQ” and “Dynamic Volume” in “Source
Setup” (
➔
50
).
Late Night
With the Late Night function, you can reduce the dynamic
range of Dolby Digital material so that you can still hear
quiet parts even when listening at low volume levels—
ideal for watching movies late at night when you don’t
want to disturb anyone.
■
Late Night
For
Dolby Digital
and
Dolby Digital Plus
sources, the
options are:
`
Off
:
Late Night function off.
`
Low
:
Small reduction in dynamic range.
`
High
:
Large reduction in dynamic range.
After changing the settings of the
“
HDMI Control
”
,
“
Audio Return Channel
”
,
“
Power Control
”
, or
“
TV
Control
”
, turn off the power to all connected pieces of
equipment and then turn them on again. Refer to the
user’s manuals for all connected pieces of equipment.
Lock Setup
Using the Audio Settings