manualshive.com logo in svg

Integra DHC-80.2, Instruction Manual

Share
Download
Integra DHC-80.2 Instruction Manual Download Page 112

112

En

Troubleshooting

Case1:

If “

No Update

” is displayed on the front display of the AV 

controller, the firmware has already been updated. You do 
not need to do anything further.

Case2:

If an error occurs, “

Error!! *-** No media

” is displayed 

on the front display of the AV controller. (Alpha-numeric 
characters on the front display are denoted by asterisks.) 
See the following table and take appropriate action.

■

Errors during update via USB

Case3:

If an error occurs during updating process, disconnect then 
reconnect the power cord and try again.

Case4:

If Error Code 

3-51

 is displayed, try the following proce-

dure.
1. Disconnect the power cord then reconnect.
2. Start up the AV controller, and select the 

NET/USB

 

selector.

3. After the “

Now Initializing

” display has changed, 

perform the update again.

Case5:

If an error has occurred due to wrong selection of input 
sources, turn off and on the AV controller. Then retry the 
update.

Error Code

Description

*

-10

, 

*

-20

USB storage device is not detected. Make sure 
the USB flash memory or USB cable is prop-
erly connected to the USB port. If the USB 
storage device has its own power supply, use it 
to power the USB storage device.

*

-14

The firmware file is not found in the root 
folder of the USB storage device, or the firm-
ware file is for other model. Retry download 
following instructions at the support website. 
If the error persists, please contact Integra 
Support and provide the error code.

Others

Retry the update procedure from the begin-
ning. If the error persists, please contact 
Integra Support and provide the error code.

ONKYO CORPORATION

2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

The Americas

Integra Division of ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 800-225-1946, 201-818-9200

Fax: 201-785-2650

Hours: M-F 9am-8pm/Sat-Sun 10am-4pm ET

<http://www.integrahometheater.com/>

Asia, Oceania

Please contact an ONKYO distributor referring to Onkyo SUPPORT 
site.

<http://www.intl.onkyo.com/support/local_support/index.html>

Summary of Contents for DHC-80.2





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands