Integra DBS-30.1 Instruction Manual Download Page 4

Page: 4 / 60

PRECAUTIONS

•

Do not use this unit when there’s the possibility

of moisture condensation occurring. Doing so
may damage your discs and certain parts inside
this unit.

If condensation does occur, remove all discs and
leave this unit turned on for two to three hours. By
this time, the unit will have warmed up and any
condensation will have evaporated.

12. Region Codes

—The BD/DVD standard uses

region codes to control how discs can be played
around the world, the world being divided into
three regions (BD) or six regions (DVD). This unit
will only play BD/DVD discs that match its region
code, which can be found on its rear panel (

13. About this Manual

—This manual explains how

to use all of this unit’s functions. Although the
BD/DVD standard offers many special features, not
all discs use them all, so depending on the disc
being played, this unit may not respond to certain
functions. See the disc’s sleeve notes for supported
features.

This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to use this
model properly, read this Instruction Manual carefully.
In case of any trouble, please contact the store where
you purchased the unit.

To prevent being exposed to the laser beam, do not try
to open the enclosure.

DANGER:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE
INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS
OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

The label on the right is applied
on the rear panel.

1. This unit is a CLASS 1 LASER

PRODUCT and employs a laser inside
the cabinet.

2. To prevent the laser from being exposed, do not

remove the cover. Refer servicing to qualified
personnel.

For U.S. Models

FCC Information for User

CAUTION:

The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.

NOTE:

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV

technician for help.

For Canadian Models

NOTE:

THIS CLASS B DIGITAL APPARATUS COMPLIES

WITH CANADIAN ICES-003.

Modèle pour les Canadien