INTARSO ESS-SQ17, User Manual, Page: 48 / 58

USER GUIDE ESS-SQ
- 46 -
9.1.5 CHANGING SETTING IN THE SHOT EDITOR
The Shot Editor is a useful tool for simulating a shot, to check the network and display settings and zeroing the
the target zones.
Figure 44: Shot Editor
The module itself is divided into 4 sections:

Display of incoming values from the target or user input
 Output values that are displayed on the shooter monitor as a shot value

The distance from the current measuring center (radius) and the angle to it

All values displayed in green are written by the system and cannot be changed
Simulating a Shot

To simulate a shot, click in one of the input fields X position or Y position .

Enter any desired shot coordinates with the keypad.
Note: 100 correspond to one millimeter.
With the button
Confirm the input values are accepted as shot coordinates and the shot is displayed on
the shooter monitor.
Input / Output
The X-position input and Y-position input fields display the coordinates that have been transmitted as shot
values from the target or generated via the input fields. The specification here is made in 100ths of a
millimetre. These values change after each shot and cannot be edited directly.
The output values are the coordinates that are actually displayed on the screen as a shot. The values of the X-
position and Y-position output can differ from those of the X-position input and the Y-position input. This
depends on the target offset and the values entered in the target definition.