INTARSO ESS-SQ17, User Manual, Page: 47 / 58

USER GUIDE ESS-SQ
- 45 -
9.1.4 CHANGING THE SYSTEM OPERATOR
The menu System Operator enables to switch to the Admin mode. If this menu item is selected, a code lock
appears on the screen, which activates further menu items by entering the correct code. The items (Shot
Editor, Multi-Editor, ESA-Communicator, System Settings and back to Windows) are explained in the following.
9.1.4.1 CHANGING THE SYSTEM OPERATOR CODE
To change the system operator code, select the following menu:

START → System Settings → System .

Enter a value for the System Operator Code and confirm with OK .
Figure 43: Changing the System-Operator-Code and the Firing Point Number
9.1.4.2 CHANGING THE FIRING POINT NUMBER
To change the system operator code, select the following menu:

START → System Settings → System .

Enter a value for the Firing Point Number and confirm with OK .