INTARSO ESS-SQ17, User Manual, Page: 39 / 58

USER GUIDE ESS-SQ
- 37 -
7 OPERATION
7.1 ACTIONS BEFORE USE
Visual inspections must be carried out before operating the system:

Perform a visual inspection for external damage.

Check target and replace, if necessary.

Check paper roll and replace, if necessary.

Check all connections.

Start the operating computer.
7.2 ACTIONS AFTER USE

Unplug the power plug.

Clean the system if necessary.

Empty the bullet trap if necessary.

Replace the target if necessary.

Replace paper roll.
The operating software is based on the Microsoft Windows operating system. All users of the software should
be familiar with the Windows operating system.
7.3 STARTING THE COMPUTER
The ESA operating software is based on the Windows operating system. All users of the software should be
familiar with the handling of Windows.

Press and hold the On/Off button.
7.4 STARTING THE SOFTWARE
Windows starts and the software is started.
If the operating software is not started automatically, you can start it by double-clicking on the "ESA 20XX"
desktop shortcut.
Figure 30: Start Screen
INFO
The connection process takes about 20 seconds after a restart.
At the start of the program, the last discipline will be started.