i-modul Modem 336 LL
AT Command Reference
Command
Description
ATZ<n>
Software reset
The command causes the i-modul Modem 336 LL 3.0 to perform a software reset.
The i-modul Modem 336 LL 3.0 will load the default saved by the user (according
to the parameter). If no parameter is specified, the user default 0 is loaded.
ATZ0
Software reset; afterwards the user default 0 is loaded.
ATZ1
Software reset; afterwards the user default 1 is loaded.
<Pause>
+++
<Pause>
Change from data mode to command mode (online command mode).
1 second pause before and after the entry, no Return -
<CR>
-. After the response
OK
, an additional waiting period of 1 second for the re-entering of
AT
commands
must be observed.
<Pause>
****
<Pause>
Start of the remote configuration at the local modem
After the 4 escape characters
****
were entered at the local modem (1 second
pause before and after the entry, no return -
<CR>
-), the remote configuration at
the remote terminal is activated. After the response
OK
, an additional waiting pe-
riod of 2 seconds for the re-entering of
AT
commands must be observed.
47
