Functions
i-modul Modem 336 LL
6.13
Switching on the Remote Configuration
The i-modul Modem 336 LL 3.0 can be configured remotely. It has a remote configuration
mode. To configure the i-modul Modem 336 LL 3.0 remotely, a data connection to the
modem to be configured must be established. This can be performed during a data con-
nection. After switching into the remote configuration mode, AT commands can be sent
to configure the i-modul Modem 336 LL 3.0.
To switch into the remote configuration mode, a data connection must be established
between the modems. If the i-modul Modem 336 LL 3.0 recognizes the character string
"
****
" in the data stream and if no data traffic takes place after that for 1 second, the i-
modul Modem 336 LL 3.0 will switch to the remote configuration. It will then send a re-
sponse and a prompt to enter the password of the remote configuration. A particular
connection type is not mandatory. We recommend using only error-corrected connec-
tions for the remote configuration to avoid AT command transfer errors.
The remote configuration is active as default.
Configuration with AT commands
To turn the remote configuration on, use the
command:
AT*R1
To enter a password for the remote configura-
tion, use the command:
AT*C
Save the settings with:
AT&W
26
