4
Installation
1. Confi rm that the Eurorack synthesizer system is powered off.
2. Locate 6 HP of space in your Eurorack synthesizer case.
3. Connect the 10 pin side of the IDC power cable to the 2x5 pin
header on the back of the module, confi rming that the red stripe on
the power cable is connected to -12V.
4. Connect the 16 pin side of the IDC power cable to the 2x8 pin
header on your Eurorack power supply, confi rming that the red
stripe on the power cable is connected to -12V.
5. Mount the Instruō
Tš-L
in your Eurorack synthesizer case.
6. Power your Eurorack synthesizer system on.
Note:
This module has reverse polarity protection.
Inverted installation of the power cable will not damage the module.
Specifi cations
• Width: 6 HP
• Depth: 35mm
• +12V: 60mA
• -12V: 40mA
Summary of Contents for Ts-L
Page 1: ...T L Oscillator User Manual...
