Instruo Ts-L, User Manual

Page: 8 / 17

WAVESHAPE
CONTROL POSITIONS
8
Pulse Width Modulation
PWM : The PWM parameter controls the width of the pulses for the PWM
waveform.
•
Turning the knob anticlockwise will decrease the width of the pulses.
•
Turning the knob clockwise will increase the width of the pulses.
PWM CV Input : The PWM CV Input is a bipolar control voltage input for
the PWM parameter.
•
Control voltage is summed with to the PWM knob position.
•
Input range: –/+5V.
PWM Waveform Crossfade: The PWM Waveform Crossfade knob
controls the blend between two parallel PWM controlled waveforms
produced by
Tš-L .
•
Turning the knob anticlockwise will blend towards the split
triangle waveform.
•
Turning the knob clockwise will blend towards the stepped
triangle waveform.