Instron 34FM-100, Preinstallation Manual

Page: 25 / 76

25
Responsibilities
Product Support: www.instron.com
Instron’s loading dock. Unless other shipping terms are specified in a purchase order,
which Instron does not dispute, the Ex-Works shipping terms apply. Under these terms,
Instron is responsible for insurance cover while the testing system is in the factory up
until it reaches the loading dock for shipping.
Installation
When the following steps have been completed:
•
site location is prepared
•
electrical service is correctly configured
•
frame and its components have been moved to the final operating location (refer to
“Lifting and handling” on page 59 )
Instron
®
is responsible for the remaining installation of the load frame, its components
and any additional accessories that may have been purchased.
The customer must not make any attempt to install the load frame without an Instron
®
service representative present.
Initial operation
Once the installation is complete, Instron
®
performs an initial operation of the load
frame and a calibration check to ensure that it is working properly.
The service representative also performs a required on-site training program. The
required on-site training takes approximately one day to complete, and is designed to
accommodate up to three individuals.
Contact Instron
®
Service for more information on this training. Additional training is
available through Instron’s training center.
Documentation
Instron
®
provides all the documentation required to operate the system, including
manuals for the load frame and any required online help systems for software
applications.
Additional copies of manuals are available and can be ordered through the Instron
®
Sales department.