www.instone3d.com
15
Flow: percentage of consumable usage amount is usually set as 100%.
⑹
Machine
Aperture of nozzle: 0.4mm.
6. Senior Parameter Setting of Slicing:
(It is applicable to professional printing effect contrast. The common printing just
adopts the default value without entering this setting)
Click next tab control “Advanced” to enter advanced printing setting.
⑴
Retraction
Speed: corresponds to retraction
function of basic parameter for
detailed setting.
Distance: the length of filament for
retract.
⑵
Quality
Initial layer thickness: thickness of the
bottom layer. If the bottom layer is
thick, it is good for increasing
adhesive force.
Initial layer line width: line width
when printing the initial layer
Cut off object bottom: subsidence
model. The subsidence part will not be
printed.
Dual extrusion overlap: the
overlapping length of consumables at
the joint when double-color nozzle
prints.
⑶
Speed
Travel speed: the movement speed of
nozzle in non-printing.
Bottom layer speed: the speed of printing the first layer. When it is low, the adhesive
force is increased.
Infill speed: the speed of printing the internal infill part.
Top/bottom speed: speed of printing top/bottom layer.
Outer shell speed: speed of printing the outer shell of the model.
Inner shell speed: speed of printing the inner shell of the model.
⑷
Cool
Minimal layer time: minimum time consumed for printing each layer
Enable cooling fan: turn on fan in the process of printing
Special notes:
