www.instone3d.com
5
Instructions
Ⅰ.Printing
1. The LCD screen will display the home page after starting up
2. Press the control knob to enter into the main menu; rotate the knob to select the
option “Print from SD card”, and press the knob to enter into the submenu
3. Rotate the knob, and select the option “print file”; press the knob to enter into the
submenu
4. Rotate the knob, select the file to be printed, then press the knob to begin printing
II. Taking down the finished printing models
Take down the printing plate after printing finished, then take down the finished
printing model by a slight bending. After that, clean the surface of the printing plate
(washable).
III.Pause printing
1. During the printing process, press the control knob, and the control menu pops up
on the display screen;
2. Rotate the knob, select the option “pause print”, and press the knob to pause
printing.
IV.Continue printing
☆
This function is only applicable to continue printing after pausing in
condition of continuous power on
1. Press the control knob, and the operation menu pops up on the display screen;
2. Rotate the knob, select the option “continue print”, and press the knob to continue
printing.
V. Stop print
☆
It is not available to continue printing after stopping printing, so please BE
CAUTIOUS when using this function
1. During the printing process, press the control knob, and the control menu pops up
on the display screen;
2. Rotate the knob, select the option “stop print”, and press the knob to stop printing.
Note: It’s IMPOSSIBLE to continue printing after “stop print”.
VI. Retract/reload the filament
This printer has been equipped with the function of automatic retract of
filament, which can be utilized in condition that the consumable is to be used up
or it is necessary to change to different colors
