15
❹ Insert the axle skewer tab washer, coupler plate and spring
through the wheel, with the parts oriented as described in
step 3. Figure 4.12
❺ Replace the spring and nut that were removed in step 1 on
the axle skewer and tighten.
❻ Rotate the quick release lever up and close fully and tightly.
Ensure the coupler pegs are inserted into holes on tab
washer. When properly tightened, the quick release lever
should leave an imprint in your hand. The pressure should
be firm but not excessive. Figure 4.13
❼ Follow step 5 - 8 on page 13. Figures 4.5 - 4.8
4
5
6
Figure 4.12
Figure 4.13
Fit the tab on the tab washer into the slot
on the bicycle frame dropout
