manualshive.com logo in svg

InStep 12-IS001TGB, Owner'S Manual

Share
Download
InStep 12-IS001TGB Owner'S Manual Download Page 4

1

1

  Safety

•  An adult who has read and understands the information and  

warnings in the manual shall assemble this product according  

to manufacturer’s instructions.

•  Do not use the product if there are any missing or damaged 

parts. Do not return the product to the store. Please contact 

customer service at 1-800-242-6110 for assistance and 

replacement parts.

•  Check the assembly (i.e.: crossbar locked, screws tight) before 

using the product.

•  Never allow children to assemble, fold, or disassemble  

the trailer.

FAILURE TO FOLLOW THE SAFETY INSTRUCTIONS LISTED 

BELOW MAY RESULT IN SERIOUS INJURY OR DEATH. Always 

read and understand the information and warnings in this 

manual before using the Bicycle Trailer. 

 

If you are unsure of any information in this manual or have a 

question regarding assembly or use please call customer 

service. Always keep this manual for reference and include it 

with resale of the Bicycle Trailer.

•  The maximum weight capacity per child is 40 lbs. The  

total weight (children and cargo) in the trailer cannot  

exceed 87 lbs.

•  Avoid serious injury from falling or sliding out. Always use 

the 5-Point Safety Harness.

•  Never leave children unattended in or around the trailer.

•  Do not add a seat pad (mattress) thicker than 2.5” 

(63.5 mm).

•  Parcels or accessories placed on the trailer may cause the 

trailer to become unstable. Do not place items on the 

trailer. Hazardous conditions may exist if package carrying 

accessories are added to the product.

WARNING!

CHILDREN

USE

ASSEMBLY

•  Never have more than two children in the trailer at one time.
•  This vehicle is intended for use with children at least 12 

months old and weighing up to 40 lbs. 

•  Never use with children that cannot support their own head.

WARNING!

WARNING!

Summary of Contents for 12-IS001TGB



























Reviews:

No comments

Brands by name

Popular brands

Load more brands