Page 7 of 22 Rev: 9/30/2011 1:26 PM
Thermostat Set Button Operation
Set button is for INSTEON linking and unlinking as well as accepting the current programming step and
going to the next one in sequence. For INSTEON functions, it works like Set does for other INSTEON
devices. Operating details can be found in other sections.
Thermostat Time / Sensor Button Operations
The Time / Sensor button allows the user to set the date, time and select the sensors/humidity to
display. It cycles between day, time, format, and each sensor option.
Up/Down arrows cycle through the available options.
Go to the next Program step by:
o
Pressing Program again
o
Press the Set button
o
NOTE: Both accepts current setting
Exit Time / Sensor setup by:
o
Time out (30 seconds)
o
Pressing any button other than Up / Down, Set or Date / Time
1st press of Time / Sensor:
- Selects day setting
- Up / Down cycles between each day of the week
2
nd
press of Time / Sensor:
Selects
Time
setting
Up / Down cycles through time in 15 minute
increments
Press and hold of Up / Down cycles faster
Note: AM / PM changes automatically as
needed
3
rd
press of Time / Sensor:
Selects Clock Format setting (12 or 24 Hr
clock)
Entire "time" section blinks
Up / Down cycles through and shows
modified time